Inti Media for Pandaboard

Inti Media for Pandaboard

Features

Multimedia Friendly

Inti Media for Pandaboard is an expansion board specially designed to expand multimedia capability of Pandaboard by adding LCD connectivity, optional speakers and 4 additional USB ports. It is also the only expansion board for Pandaboard with both resistive and capacitive touch screen capability.

10 inch LCD with projected capacitive touch screen

10.1 inch WXGA (1280x800) LCD with projected capacitive touch screen, elegant bezel and our latest product - a specialy designed frame that will not only make it extremally easy to install your LCD on an Inti Media board but also will make it look like a tablet (well at least from the top :)

10 inch LCD with resistive touch screen

10.1 inch WSVGA (1024x600) LCD with resistive touch screen, also featuring low voltage LED backlight and industrial grade coating.

Just the right size

The board is designed to be just the right size. Measuring 275x146mm it is just enough bigger than your 10 inch LCD display to easily support with our new LCD frame but not big enouth to take too much space on your desk.

Inti Media dimensions

Add-on boards

Do you need GPS for your project? Or perhaps motion sensors with gyro and accelerometers? Fancy expanding your storage with additional SATA SSD drive. We thought you might.

Inti Media will will let you connect a selection of add-on boards via dedicated expansion headers.

  • GPS board with built-in antenna or a high gain active external antenna. Both featuring cutting edge SiRF IV GPS engine. Optionally the board can be fitted with gyro and accelerometer sensors.
  • Serial ATA board with a micro sata connector, enabling you to use inexpensive 1.8" SSD devices. The board uses USB to SATA adapter and connects to Pandaboard via USB4
  • Tiny but mighty stereo speakers with an I2C connection for volume control.
  • Digital 5MP camera. Can be used with or without Inti Media.

Inti Media explained

Inti Media explained

Inti Media explained

Tech Spec

Technical Specification

Size

Inti Media dimensions
  • Width: 275mm
  • Depth: 146mm
  • Height: 16mm

Connectivity

  • Pandaboard:
    • 2 2x14 2.54mm general purpose headers
    • 2 2x10 1.27mm LCD headers
  • Expansion
    • 2x10 2.54mm socket (3V3 I2C, 2xGPIO, UART, 3V3 and 5V)
    • 2x10 2.54mm socket (3V3 SPIO 4 x CS)
  • SATA:
    • 2x10 2.54mm socket (USB, 3V3 I2C, 3V3 and 5V).
  • LCD:
    • 2x10 2.00mm RA header - single channel LVDS.
    • 1x6 JST S6B - backlight power.
  • Touch Screen
    • 1x4 1.00mm FFC - Resistive touch panel
    • 1x8 0.5mm FFC - I2C for capacitive touch panel.
  • Speakers:
    • 2 2x3 2.54mm socket I2C and power
    • Audio signal directly from pandaboard
  • Power:
    • Chassis socket - 5V center positive

LCD

10 inch LCD with projected capacitive touch screen

10.1 inch LCD with capacitive multitouch screen.

  • Manufacturer:AUO
  • Model:B101EW05
  • Type: LCD with touch screen and bezel
  • LCD technology: TN
  • Resolution: 1280x800px
  • Color depth: 18bits
  • Connectivity LVDS single channel
  • Touch technology: Projected capacitive multitouch
  • Touch controller: mXT 1386, I2C
  • Dimensions: 255x159mm (with bezel)
10 inch LCD with resistive touch screen

10.1 inch LCD with capacitive multitouch screen.

  • Manufacturer:DLC Displays
  • Model:DLC1010BGG-T
  • Type: LCD with touch screen
  • LCD technology: TN
  • Resolution: 1024x600px
  • Color depth: 18bits
  • Connectivity LVDS single channel
  • Touch technology: Resistive 4-wire
  • Touch controller: -
  • Dimensions: 235x143mm

Add-on boards

GPS

GPS, gyro and accelerometer module

  • GPS with integrated or external active antenna
    • Acquisition sensitivity -148 dBm (autonomous)
    • Navigation sensitivity -160 dBm
    • Tracking sensitivity -163 dBm
    • 48 Channels
    • Cold start less than 35s, hot start 1s
    • Accuracy better than 2.5m
    • Connectivity via UART and SPI
  • Optional 3D Gyro sensor - SPI
  • Optional 3D Accelerometer - SPI
SATA

SATA module

  • SATA over USB connection (USB4 on Pandaboard)
  • Micro sata connector
  • Accepts 1.8" drives 5V/3.3V

Add comment


Security code
Refresh